 |
 |
| View #1 |
View #2 |
 |
 |
| View #3 |
View #4 |
Details
These are Corcom Power Inlet Filters (p/n: C1141) and these sell for $25.02 each on State Electronics web site. These are new and are ready to use with the exception of adding the two fuses. The photo above shows the fuse holder opening and red fuse holder. Easy removal and replacement of blown fuses. I have more than 200 of these so if you need a large quantity, please
contact us with the quantity needed and we'll give you a quote. We still have two un-opened boxes with 80 pieces per box if you need that many.
Description
The P Series power-entry module offers full flexibility of design in the most compact package.
As the first module to provide all five power entry functions in one compact design, the "Chameleon" readily adapts to its environment and the needs of international markets.
 | Snap-in mounting |
| IEC power line connector |
| Both North American and European fusing capabilities |
| Two voltage selection |
| DPST on/off switch |
| Filtering for general purpose and medical applications |
The P Series compact design and modular construction will allow you to select all the power entry features you require - without altering the panel cutout. And the P Series, with adapters, will fit any standard panel cutout you currently have designed.
The P Series is available with a variety of filtering options:
S Models - General purpose applications where line-to-ground and line-to-line noise must be controlled. These filters allow compliance with FCC limits for linear power supplies. They are available with current ratings of 6 amps.
For the complete specs and details on these Corcom power inlet filters, please visit the P-Series page on Corcom's web.
Specifications
| Maximum leakage current, each line-to-ground |
| @ 120 VAC 6OHz: |
S Models |
0.25 mA |
| @ 250 VAC 5OHz: |
S Models |
0.50 mA |
Hipot rating (one minute):
Line-to-ground
Line-to-line |
1500 VAC
1450 VDC |
| Operating voltages: |
115/230 VAC |
| Operating frequencies: |
50/60 Hz |
| Rated Voltage: |
120/250 VAC |
| Switch: |
Double-insulated, rated for 10,000
operations at full load.
51 amps inrush capability. |
| Terminals: |
.187" x .032" terminal tabs |
| Operating Ambient Temperature: |
|
-10°C to +40°C @ rated currentIr |
In an ambient temperature (Ta) higher than 40°C, the maximum operating current (Io) is calculated as follows:
 |
Minimum insertion loss in dB:
|
Line-to-ground in 50 ohm circuit |
|
Current
Rating |
Frequency MHz |
| .03 |
.10 |
.15 |
.5 |
1 |
3 |
5 |
10 |
30 |
| S Models |
| 6 amps |
- |
8 |
12 |
17 |
23 |
32 |
36 |
44 |
30 |
|
Case Dimensions
Metric shown in italics.
|
Part No. |
A
(max) |
B
(max) |
C
(max) |
D
(.008-.000) |
E
(.008-.000) |
F
|
|
PS |
1.24
31.49 |
2.13
54.10 |
2.31
58.67 |
1.060
26.93 |
2.201*
55.91 |
|
| * |
Panel cutout for thickness of .031-.079 (0.8-2.0) for panel thickness at .083-.114 (2.1-2.9) use 2.213 (56.21). |
| + |
Panel cutout for panel thickness of 0.060-0.090. |
| For shielded models use D=1.12 |
+ .008 |
| - .000 |
Shields can be used only with filtered models. Shields add
approximately 0.06" to depth. |
Case Style
PS
| Recommended Panel Cutout |
 |
|
Note 1:The external edges (installation side) on the "D" sides of the cutout should have a minimum .020" radius. For optimal retention against extraction, the corresponding inner edge should be sharp, without paint or coating. Edge coatings, including anodization are also discouraged for good shield contact. |
Shipping & Handling
The shipping to the U.S.A. only will be $4.70 for orders
up to 10 pieces . The shipping method will be USPS Priority Mail (2~3 days).
Larger orders may ship by FedEx Ground depending on the quantity and weight. You
will only pay the actual shipping.
For Canada will run $9.00 and will use Global Priority Mail (3~5 days).
Again, I will negotiate the amount required for large orders. These would ship
using International FedEx Ground.
Quantity Pricing
| Qty. |
Price |
|
Total Cost |
| 1-25 |
$ 15.00 |
For the first 25 pieces |
$375.00 |
| 26-50 |
$ 14.30 |
For the next 25 pieces
Plus the price above |
$357.50 + $375.00 = $732.50 |
| 51-75 |
$ 13.60 |
For the next 25 pieces
Plus the price above |
$340.00 + $732.50 = $1072.50 |
| 76-100 |
$ 12.90 |
For the next 25 pieces
Plus the price above |
$322.50 + $1072.50 = $1395.00 |
| 101-125 |
$ 12.20 |
For the next 25 pieces
Plus the price above |
$305.00 + $1395.00 = $1700.00 |
| 126-150 |
$ 11.50 |
For the next 25 pieces
Plus the price above |
$287.50 + $1700.00 = $1987.50 |
| 151-175 |
$ 10.80 |
For the next 25 pieces
Plus the price above |
$270.00 + $1987.50 = $2257.50 |
| 176-200 |
$ 10.10 |
For the next 25 pieces
Plus the price above |
$252.50 + $2257.50 = $2510.00 |
| 201-225 |
$ 9.40 |
For the next 25 pieces
Plus the price above |
$235.00 + $2510.00 = $2745.00 |
Quantity Remaining: 236
Payment Options
I will accept the following types of payments by order of preference:
| PayPal (account = sales25@awega.com) |
| Money order |
| Cashiers check |
| Corporate check |
| Personal check |
A Corporate or Personal check will delay shipping while it is being processed.
For more information on this item, please
contact us.
| 
